Yinhe Mercury II (No. 9021) pips-in ITTF approved table tennis rubbers with sponge. We offer these rubbers in a choice of soft, medium and hard. Buy single rubber sheets in the colour of your choice OR buy a pair (one red + one black rubber).
These are good all round rubbers and are ideal for players beginning to learn to play table tennis. Most beginners and intermediate players prefer the soft or medium rubbers. More experienced players may prefer the hard rubbers. Mercury II rubbers are tacky, for good spin and control.
Medium: 36 - 38 degree hardness
Yinhe (also known as Milky Way) table tennis products are known for their low prices and high quality. Yinhe are a professional table tennis equipment manufacturer from China who are very popular in the Asian market. They are not yet that well known in Europe but we think this will change as their products become better known here.
Please note that the packaging design may vary from that shown in our photographs. This is due to Yinhe updating and revising their packaging over time. The product remains unchanged.
User reviews of these rubbers are available on the Table Tennis Database web site.
Rubbers will need to be glued to your blade using a suitable adhesive and then cut to shape. There are lots of good guides to doing this on You Tube.
- Yinhe Mercury II rubbers ITTF approved.
- MEDIUM sponge hardness 2.0mm
- Weight: 98g (approx weight including packaging of one rubber)
- Pips in.
- 2.0mm thick.
- Sold in the original factory sealed packaging.
- These are fresh rubbers direct from the factory.
- Table Tennis rubbers at competitive prices!
Rubbers come with sponges of differing hardness measured in degrees °. A higher number means a harder sponge. Generally, harder sponges give more speed with less spin, while softer sponges give better control with more spin and less speed. New players will probably not notice much difference. If you are not sure, try picking a soft to medium hardness (up to about 42°).
Inverted (pips-in) rubbers are most commonly used by competitive players. It means the smooth but grippy (tacky) rubber surface is in contact with the ball which creates lots of spin. Conversely, pips-out rubbers have the pips (pimples) in contact with the ball and are presently less popular.
The rubbers are supplied in the original manufacturers sealed packaging. These rubbers will need to be fixed to your blade using a suitable glue and then cut to shape. Be sure to place the ITTF logo next to the handle. Most rubbers have a thin protective plastic sheet over the surface that will need to be removed prior to play.
Table tennis bat rubbers have a ‘shelf life’ of about 18 months. Beware of buying rubbers or ready made bats where the rubber may be so old that it has deteriorated: this can be the case with paddles or rubbers which have been kept on display in sports stores or when making a second hand purchase. As the rubber deteriorates it loses grip (tackiness) – grip is essential to put spin on the ball, which is crucial to playing modern table tennis. All our ready made bats and rubbers are freshly imported from the manufacturer and you can be confident that the rubbers are brand new.
To help preserve your bat and rubber condition we recommend you keep your bat in a bag and store it out of direct sunlight and away from sources of heat.
Do not touch the rubber surface because you will transfer sweat and oil from your fingers.
To help maintain performance, occasionally gently clean the rubber with water or use a specialist bat cleaning fluid.
Table tennis rubbers are glued onto the blade and can peel off at the edges if the bat catches the table, particularly if the bat edge is pushed along the surface of the table. Be careful during play!
Like all table tennis rubbers, the rubber condition will slowly deteriorate over time and will lose tackiness. The more you play the quicker your bat rubber will wear out! Luckily, rubbers can be replaced when required.
Any new bat or rubber will take a little getting used to at first.
Please note damage to your table tennis bat or rubber which might reasonably result from normal wear and tear is NOT considered a fault; this includes worn, peeling or torn rubbers, chipped or worn wood. We cannot replace any rubber once the packaging has been opened unless it can be shown to be faulty.
If you have any questions we will be pleased to help. You can contact us by email.
3 Reviews Hide Reviews Show Reviews
I play with this rubber on both sides (lightly boosted) on a fairly stiff/hard/fast blade. Great spin and control. The tackiness reduces the speed a bit, but It gets faster over the first few weeks/months as the tackiness reduces to mild. It doesn't have the extreme catapult of tensors, but has plenty of zip for opening loops and mid-distance loops.
very good fh and bh rubber. High spin and throw usually chiness rubber have low throw but this one in the same level as Vega pro or tenergy. Speed is good spin very high, overall great rubber for the price.
For the price this is an excellent rubber, it competes well with more expensive rubbers.